Corrigendum to: Optimization of bio-based cellulose–phosphate hydrogel production from rice husk waste using the Taguchi method

Authors

  • Selvia Aprilyanti Department of Industrial Engineering, Faculty of Engineering, University of Tridinanti, Indonesia Author
  • Irnanda Pratiwi Department of Industrial Engineering, Faculty of Engineering, University of Tridinanti, Indonesia Author
  • Winny Andalia Department of Industrial Engineering, Faculty of Engineering, University of Tridinanti, Indonesia Author
  • Tine Aprianti Department of Chemical Engineering, School of Engineering, The University of Western Australia, Australia Author
  • Hariman Al Faritzie Department of Civil Engineering, Faculty of Engineering, University of Tridinanti, Indonesia Author

DOI:

https://doi.org/10.24036/teknomekanik.v9i3.59372

Abstract

This Corrigendum relates to the following article:

Selvia Aprilyanti, Ahmad Yani, M. Yusuf, Optimization of Bio-Based Cellulose-Phosphate Hydrogel Production from Rice Husk Waste Using the Taguchi Method. Teknomekanik, 9(1), 77–90 (2026). https://doi.org/10.24036/teknomekanik.v9i1.47172

Following publication of the above article, the authors identified several editorial inaccuracies requiring formal correction. These corrections include the addition of missing cross-references to Figures 3–7 within the manuscript text, revision of the schematic presented in Figure 3, correction of the caption and interpretation of Figure 5, and correction of the magnification information reported in the caption of Figure 7. These corrections improve the clarity and internal consistency of the published article and do not affect the experimental data, statistical analyses, results, scientific interpretation, or conclusions of the study.

Downloads

Published

02-08-2026

Issue

Section

Corrigendum

How to Cite

Aprilyanti, S., Pratiwi, I., Andalia, W., Aprianti, T., & Faritzie, H. A. (2026). Corrigendum to: Optimization of bio-based cellulose–phosphate hydrogel production from rice husk waste using the Taguchi method. Teknomekanik, 9(3). https://doi.org/10.24036/teknomekanik.v9i3.59372

Share

Most read articles by the same author(s)