The Effect of Current Strength Towards ABREX Steel 400 Pulling Strength by Using SMAW Welding with Electrode E7018

Authors

  • Muhammad Rizki Universitas Negeri Padang
  • Nelvi Erizon Universitas Negeri Padang
  • Budi Syahri Universitas Negeri Padang
  • Rodger Eliab jr Iloilo Science and Technology University

DOI:

https://doi.org/10.24036/teknomekanik.v3i2.5972

Keywords:

Welding Current, Tensile Strength, SMAW, ABREX Steel 400, E7018

Abstract

The aim of this study is to determine the effect of variations in welding current strength on the tensile strength of ABREX 400 steel weld joints. The results of this study are expected to give contribution toward the world of metal welding, especially low carbon steel metal welding which will later be beneficial for the development of the metal industry and technology. The method used in this research was the experimental method. In addition, the process of welding the material used SMAW welding and the type of seam V connection and the variations in the current strength used are 90 A, 100 A, and 110 A. The specimen used was a TRS 400 low carbon steel plate with a thickness of 10 mm and the electrode used was the E7018 electrode Ø 3.2 mm. The standard specimen used was ASTM-8 and the test was carried out using the Universal Testing Machine tensile test device. As a result, the research showed that the tensile strength at a current of 90 A was 588.91 N / mm2, a current of 100 A was 570.56 N / mm2, and a current of 100 A was 545.17 N / mm2. Based on the results of the research, it can be concluded that welding using a current strength of 90 A produces the highest tensile strength value, namely 588.91 N / mm2 compared to currents of 100 A and 110 A.

Downloads

Download data is not yet available.

References

Dhabhi B R, Chauhan V D, Choksi P.G. Review for Design of Gripper in Universal Testing Machine. International Journal for Scientific Research & Development. 2016; 4 (1).

Nurdin H. Fernanda Y, Handayani, M. Analysis of Tensile Strength the Fiber Bagasse Particles Board with Resin Adhesives. Teknomekanik. 2018; 1 (1) : 1-5. Doi: 10.31227/osf.io/4zrbp

Alip M. Teori dan Praktik Las. Departemen Pendidikan dan Kebudayaan. 1989.

Isnugroho K. Hidayat H, Amin M. Hendronursito Y, Astuti W. Analysis of Shielded Metal Arc Welding (SMAW) On High Manganese Steel Hammer-mill Crushe. Journal of Mechanical Engineering. 2019; 16 (2) : 93-107.

Refdinal, Ramli, Andesko R. Differences Strength of Low Carbon Stainless Steel St 37 with Electrical Welding Compound V Use Materials Add Electrodeof Type-RB and

Type –RD. Teknomekanik. 2018; 1 (1) : 12-17. Doi: 10.24036/tm.v1i1.472

Suharno. Prinsip-Prinsip Teknologi dan Metalurgi Pengelasan Logam. Jawa Tengah: UNS Press. 2008.

Munawar et al. The Effects of Shielded Metal Arc Welding (SMAW) Welding On The Mechanical Characteristics With Heating Treatment inn S45c Steel. Journal of Physics: Conference Series. 2018. Doi: 10.1088/1742-6596/962/1/012063

Deshpande M U, Kshirsagar J M, Dharmadhikari H M. Optimization of GMAW Process Parameters to Improve the Length of Penetration in EN 10025 S 235 Grade. Journal of Welding and Joining. 2017; 32 (1) : 74-78. Doi: 10.5781/JWJ.2017.35.1.74

Selvam R, Jacob S. Experimental Investigation and Analysis of Smaw Processed Carbon Steel Pipes. International Journal of Mechanical and Production Engineering Research and Development. 2018; 8 (5) : 29-40.

Arifin. 1997. Las Listrik dan Otogen. Jakarta: Ghalia Indonesia.

Adedayo A V, Ibitoye S A, Oluwole O O. Tempering Heat Treatment Effects On Steel Welds. Journal of Minerals And Materials Characterization And Engineering. 2011; 10 (8) : 547-557. Doi: 10.4236/jmmce.2011.108059

Parmar A, Dubey A. Study of heat affected zone for smaw process for low carbon steel specimen with controlled parameters. International Journal of Modern Trends in Engineering and Research. 2017; 4 (11). Doi: 10.21884/ijmter.2017.4339.cy2nc

Dadi A, Goyal B, Patel H. A Review Paper on Optimization of Shielded Metal Arc Welding Parameters for Welding of (Ms) Sa-516 Gr.70 Plate by Using Taguchi Approach. International Journal of Scientific Research in Science and Technology. 2018; 4 (5) : 1536-6011.

Pratomo M A, Jasman, Erizon N, Fernanda Y. The Variation Effect of Electric Current Toward Tensile Strength on Low Carbon Steel Welding with Electrode E7018. Teknomekanik. 2020; 3 (1) : 9-16. Doi: https://doi.org/10.24036/tm.v3i1.5572

Jasman, J., Irzal, I., Adri, J., & Pebrian, P. Effect of Strong Welding Flow on the Violence of Low Carbon Steel Results of SMAW Welding with Electrodes 7018. Teknomekanik. 2018; 1 (1) : 24-31. Doi: https://doi.org/10.24036/tm.v1i1.972

Oluwasegun S. Odebiyi, Segun M. Adedayo, Lawal A. Tunji and Martins O. Onuorah. A Review of Weldability of Carbon Steel in Arc-Based Welding Processes. Cogent Engineering. 2019; 6 (1) : 1-32. Doi: https://doi.org/10.1080/23311916.2019.1609180

ABREXTM. Abrasion Resistant Steel Plates Guidelines for Welding. Nippon Steel Corporation. 2019.

Yadav, Devendra & Gaikwad, Abhishek. Comparison and Testing of Tensile Strength for Low & Medium Carbon Steel. International Journal of Mechanical Engineering (IJME). 2015; 4 (5) : 1-8.

Ameen A. Nassar, Rafil M. Lefta and Muthanna J. Abdulsada. Experimental Study of The Effect of Welding Electrode Types on Tensile Properties of Low Carbon Steel Aisi1010. Kufa Journal of Engineering. 2018; 9 (4) : 163-173. Doi: 10.30572/2018/kje/090411

Didit Sumardiyanto, Sri Endah Susilowati. Effect of Welding Parameters on Mechanical Properties of Low Carbon Steel API 5L Shielded Metal Arc Welds. American Journal of Materials Science. 2019; 9 (1) : 15-21. Doi: 10.5923/j.materials.20190901.03

Wiryosumarto, H., & Okumura, T. Teknologi Pengelasan Logam. Jakarta: Pradnya Paramita. 2008.

Sonawan, H., & Suratman, R. Pengantar Untuk Memahami Pengelasan Logam. Bandung: Alfabeta. 2004.

Syambabu Nutalapati, Dr. D. Azad and Dr. G. Swami Naidu. Effect of Welding Current on Welding Speed and Ultimate Tensile Strength (UTS) of Mild Steel. International Journal of Mechanical Engineering and Technology. 2016; 7 (5): 156-176.

İpek, Nazlı & Elaldi, Faruk. Analysis of Welding Groove Angle and Geometry on Strength of Armor Steel. Materials and Manufacturing Processes. 2012; 27:12, 1437-1441. Doi: 10.1080/10426914.2012.709343

ASTM E8/E8M. Standard Test Methods for Tension Testing of Metalic Materials.

Downloads

Published

2020-12-09

How to Cite

Rizki, M., Erizon, N., Syahri, B., & jr, R. E. (2020). The Effect of Current Strength Towards ABREX Steel 400 Pulling Strength by Using SMAW Welding with Electrode E7018. Teknomekanik, 3(2), 36–42. https://doi.org/10.24036/teknomekanik.v3i2.5972

Issue

Vol. 3 No. 2 (2020): Regular Issue

Section

Research Articles

Most read articles by the same author(s)