The Optimization of Building Energy Consumption in Universitas Negeri Padang Using Building Energy Simulation Program
DOI:
https://doi.org/10.24036/teknomekanik.v4i1.9672Keywords:
Building energy consumption, Green building, Energy Plus, Energy savingAbstract
Energy consumption of a building is one of the biggest sources of energy use today. Green Building Comitte Indonesia (GBCI) has launched a concept of energy consumption saving in a nationally standard building. Audit Building energy audit is the way to know how actual building energy consumption is and find alternative solution to decrease energy consumption in order to fulfill the energy saving building criteria. Two types of HVAC systems will be run in the EnergyPlus simulation, split AC and central AC. The previous research proved that central AC is better than split AC system for energy saving in the building with 20 floors. The simulation results show that by using a certain energy system, a more efficient energy system will be achieved and can still maintain the comfort of the room at a temperature of 24 °C and relative humidity according to the Green Building Indonesia standard reference.
Downloads
References
Assessment of Green Buildings,” in Encyclopedia of Renewable and Sustainable Materials, Elsevier, 2019, pp. 92–97.
Green Building Council Indonesia, Greenship Existing Building, Version 1. Jakarta, 2011.
Badan Standarisasi Nasional, SNI 03-6390-2011: Konservasi Energi Sistem Tata Udara pada Bangunan Gedung. Jakarta: Dewan Standarisasi Indonesia, 2011.
Autodesk, Occupancy Schedules. 2020.
Autodesk, Space Type Data for Energy Analysis. 2020.
DesignBuilder, General Lighting. 2020.
Big Ladder Software, “Daylighting Control,” 2020, [Online]. Available: https://bigladdersoftware.com/epx/docs/8-0/input-output-reference/page-016.html.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Andre Kurniawan, Nanang Qosim, Remon Lapisa, Zainal Abadi, Jasman Jasman
This work is licensed under a Creative Commons Attribution 4.0 International License.
Most read articles by the same author(s)
- Jasman Jasman, Irzal Irzal, Pebrian Pebrian, Effect of Strong Welding Flow on the Violence of Low Carbon Steel Results of SMAW Welding with Electrodes 7018 , Teknomekanik: Vol. 1 No. 1 (2018): Regular Issue
- Herman Zulhafril, Jasman Jasman, Kimberly June Tespoer, The Effect of Cooling Media on Tensile Strength of Medium Carbon Steel in Post Welding Process Using Electric Welding (SMAW) with E7018 Electrodes , Teknomekanik: Vol. 3 No. 2 (2020): Regular Issue
- Nelvi Erizon, Jasman Jasman, Irzal Irzal, Muhammad Fikhri Aldio, Aprizal Saputra, Chau Trung Tin, Numerical analysis of flow characteristics of the oil-water mixture in stratified-annular horizontal pipe , Teknomekanik: Vol. 5 No. 2 (2022): Regular Issue
- Muhammad Agung Pratomo, Jasman Jasman, Nelvi Erizon, Yolli Fernanda, The Variation Effect of Electric Current Toward Tensile Strength on Low Carbon Steel Welding with Electrode E7018 , Teknomekanik: Vol. 3 No. 1 (2020): Regular Issue
- Nelvi Erizon, M Iksan Ardiyansyah, Jasman Jasman, Yufrizal A, Effect of Cooling Media on Steel Hardness ST 37 On Conventional Lathe Process , Teknomekanik: Vol. 1 No. 1 (2018): Regular Issue
- Purwantono Purwantono, Bahrul Amin, Abdul Aziz, Jasman Jasman, Andre Kurniawan, Performance test of Pikohidro Cross flow Water Turbine using multilevel double penstock , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue
- Nelvi Erizon, Jasman Jasman, syahrul syahrul, Wakhinuddin Wakhinuddin, Manufacture of Gambir Leaf Press Impac System in Efforts to Increase Productivity of Gambir Farmers , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue
- Andre Kurniawan, Remon Lapisa, Muhammad Yasep Setiawan, Bulkia Rahim, Budi Syahri, Comparison of variation in the building shapes and the window-to-wall ratio by concerning energy consumption for thermal comfort and lighting , Teknomekanik: Vol. 6 No. 2 (2023): Regular Issue
- Jasman Jasman, Nelvi Erizon, Irzal Irzal, Junil Ardi, Making Print Tool Gambir Sap Parallel Slinder System , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue