Simulation of Multi Blade Rotor Performance at Horizontal Axis by Ansys Version 18.0 Using For Planning Dual Rotor Wind Turbine Models
DOI:
https://doi.org/10.24036/tm.v2i1.2172Keywords:
Wind Turbine, Wind Speed, Maximal Preasure, BladeAbstract
The dual rotor wind turbine is a wind turbine which has horizontal and vertical sides. The data obtained in the form of average wind speed, the speed of rotation of the horizontal and vertical vanes. Researchers want to create simulations of multi rotor blade performance on the horizontal side using Ansys application version 18.0. The purpose of this research is looking at changes in wind speed on the outlet area with wind speed sign at the inlet area is 4 m/s. Researchers want to see maximum wind pressure at the inlet area, pressure on the area of the blade, the pressure at the outlet area. The results obtained show that the wind speed in the area of the inlet is of 4 m/s changed to 3.99237 m/s at area outlets. Maximum pressure in the inlet area is of 0.133612 Pa. turn into 457,528 Pa. area blade windmills, to the outlet pressure area turn into 0 Pa.
Downloads
References
M Nur Syafe’i, “Rancang Bangun Simulasi Turbin Air Cross Flow,” Universitas Negeri Padang, 2016.
F. Aryanto, I. M. Mara, and Made Nuarsa, “Pengaruh Kecepatan Angin dan Variasi Jumlah Sudu Terhadap Unjuk Kerja Turbin Angin Poros Horizontal,” vol. 3, no. 1, pp. 50–59, 2013.
F. H. Napitupulu and F. Mauritz, “Uji Eksperimental Dan Analisis Pengaruh Variasi Kecepatan Dan Jumlah Sudu Terhadap Daya Da Putaran Turbin Angin Vertikal Axis Savoniu Dengan Menggunakan Sudu Pengarah.,” J. Din., vol. II, no. 12, p. 11, 2013.
Hasanuddin and Hendri Nurdin, “Unjuk Kerja Kincir Angin Transmisi Roda Gigi Planiter Differensial untuk Peningkatan Revolutionary Energy dan Konversi Potensi Angin Menjadi Tenaga Listrik,” no. January, 2019.
R. Sumiati and A. Zamri, “Rancang Bangun Miniatur Turbin Angin Pembangkit Listrik Untuk Media Pembelajaran,” J. Tek. Mesin, vol. 3, no. 2, pp. 1–8, 2013.
A. Sifa, T. Endramawan, I. Maolana, and A. R. Muhammad, “Pengujian Variasi Jumlah Blade Fiberglass Kincir Angin Tipe Horizontal untuk Pemompa Air Garam,” vol. 8, no. 2, pp. 89–97, 2018.
A. M. Harahap, “Analisis Numerical Aliran Fluida pada Rumah Vortex Turbine dengan Water Dept 200 mm dan Inlet Velocity 0.20 m/s Menggunakan Aplikasi Ansys Fluent Versi 16.2,” Padang, 2017.
Downloads
Published
How to Cite
Issue
Section
Most read articles by the same author(s)
- Hendri Nurdin, Waskito Waskito, Batu Mahadi Siregar, Characteristics Particleboard Made From Areca Fiber With Tapioca and Gambier Adhesive , Teknomekanik: Vol. 4 No. 1 (2021): Regular Issue
- M Saddikin, Hendri Nurdin, Hasanuddin Hasanuddin, Primawati Primawati, Analysis Physical and Mechanical of Particle Boards Raw Materials Nipah Fruit Fiber , Teknomekanik: Vol. 2 No. 1 (2019): Regular Issue
- Ar Trisyaldi, syahril syahril, Purwantono Purwantono, Waskito Waskito, Primawati Primawati, Study of Ship Design Maninjau Lake Tourism by Using Catamaran Hull Type and Fiberglass Material , Teknomekanik: Vol. 2 No. 1 (2019): Regular Issue
- Nelvi Erizon, Jasman Jasman, syahrul syahrul, Wakhinuddin Wakhinuddin, Manufacture of Gambir Leaf Press Impac System in Efforts to Increase Productivity of Gambir Farmers , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue
- Ikhsan Zulmaidas, Syahrul Syahrul, Ambiyar Ambiyar, Yufrizal A, Manufacture and Testing of Belt Grinding Development , Teknomekanik: Vol. 2 No. 1 (2019): Regular Issue
- Purwantono Purwantono, Waskito Waskito, Putu Satria Rinaldo, primawati primawati, Design Build Dryer Machine Frying Results Nuts Eggs , Teknomekanik: Vol. 1 No. 1 (2018): Regular Issue
- Hendri Nurdin, Waskito Waskito, Anna Niska Fauza, Batu Mahadi Siregar, Bagdaulet Kenzhaliyevich Kenzhaliyev, The investigation of physical dan mechanical properties of Nipah-based particle board , Teknomekanik: Vol. 6 No. 2 (2023): Regular Issue
Similar Articles
- Nelvi Erizon, Jasman Jasman, syahrul syahrul, Wakhinuddin Wakhinuddin, Manufacture of Gambir Leaf Press Impac System in Efforts to Increase Productivity of Gambir Farmers , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue
- Jasman Jasman, Nelvi Erizon, Irzal Irzal, Junil Ardi, Making Print Tool Gambir Sap Parallel Slinder System , Teknomekanik: Vol. 2 No. 2 (2019): Regular Issue
You may also start an advanced similarity search for this article.
