The Variation Effect of Electric Current Toward Tensile Strength on Low Carbon Steel Welding with Electrode E7018
DOI:
https://doi.org/10.24036/tm.v3i1.5572Keywords:
Electric Current, SMAW, Low Carbon Steel, Electrode, Tensile TestAbstract
The strength of the welding result is strongly influenced by several factors, one of which is the selection of high current. This study aims to determine the effect of high current of welding on the strength of low carbon steel welding joints. The process of welding the material uses the open V seam connection type. The variations of the high current used were 80 A, 100 A and 130 A. The specimen used was a carbon steel plate with code of 1.0038 with thickness of 8 mm and the electrode used was the E7018 electrode with diameter of 3.2 mm. The strength of the welding results is influenced by arc voltage, amount of current, welding speed, amount of penetration and electric polarity. Determination of the amount of current in metal joints using arc welding affects the work efficiency and welding materials. Based on the research, it was found that welding using high current of 100 ampere produced the highest tensile strength value of all test specimens that were given welding treatment and good penetration results.
Downloads
References
Wiryosumarto, Harsono Dan Okumura, Toshie, Teknologi Pengelasan Logam. 8th Ed. Jakarta: PT Pradnya Paramita, 2000.
Nikko Welding Hanbook. Nikko Steel Welding Consumables And Procesess. Volume 2. 2013
S. Hestukoro, I. Roza, And D. Morfi Nst, Process Analysis Of High Speed Steel Cutting Calculation (HSS) With S45 C Material On Universal Machine Tool. Int. J. Innov. Sci. Res. Technol., Vol. 3, No. 1, 2018.
Nusulul Huda, Jasman, Pengaruh Kuat Arus Terhadap Uji Tarik Material Baja Karbon Rendah Menggunakan Metal Inert Gas (Mig). Ranah Research. Volume 2, Issue 1, November 2019.
Cary, H.B, . Modern Welding Technology. 4th Ed. New Jersey: Prentice Hall, 1998.
A. H. H. Ahmad Yani1, Junaidi2, M. Irwanto3, Optimum Reactive Power To Improve Power Factor In Industry Using Genetic Algorithm. Int. J. Electr. Eng. Comput. Sci., Vol. 14, No. 2, Pp. 751–757, 2019.
Indra Roza Junaidi, Weriono, Irrigation Water Debit Analysis That Will Be Used On Micro Power Plant In SEI . Rampah Sub-District Of Serdang Bedagai Regency, Int. J. Innov. Sci. Res. Technol., Vol. 3, No. 1, 2018.
Kou, S., Welding Metallurgy. 1st Ed. Singapore: Jhon Wiley And Sons. 1987.
Daryanto. Keselamatan Dan Kesehatan Kerja Bengkel. Jakarta: Rineka Cipta. 2007.
Ferry Budhi Susetyo, Ja’far Amirudin, Studi Karakteristik Pengelasan Smaw Pada Baja Karbon Rendah St 42 Dengan Elektroda E 7018. 1st Ed. Jakarta : Jurnal Konversi Energi Dan Manufaktur UNJ. Oktober 2013.
S. H. A. 3 A. B. 4 E. S. H. Junaidi1, Effect Of Variation Of Point Welding Electric Flow On Low Carbon Steel, Medium Carbon Steel And High Carbon Steel Sheielding Metal Arc Welding (Smaw), Teknologi, Vol. 19, No. 6, Pp. 1–4, 2019
Gharibshahiyan, E., Raouf, A.H., Parvin, N., Rahimian, M.. The Effect Of Microstructure On Hardness And Toughness Of Low Carbon Welded Steel Using Inert Gas Welding, Materials & Design, Vol. 32, No. 4, 2042-2048, 2011. Doi: 10.1016/J.Matdes.2010.11.056.
Sakthivel, T., Sengar, G.S., Mukhopadhyay, J. Effect Of Welding Speed On Microstructure And Mechanical Properties Of Friction-Stir-Welded Aluminum, The International Journal Of Advanced Manufacturing Technology, Vol. 43, No. 5-6, 468-473, . 2009 Doi: 10.1007/S00170-008-1727-7.
Sahin, M.. Joining With Friction Welding Of High-Speed Steel And Medium-Carbon Steel, Journal Of Materials Processing Technology, Vol. 168, No. 2, 202-210, 2005. Doi: 10.1016/J.Jmatprotec.2004.11.015.
Ferry Budhi Susetyo, Ja’far Amirudin, Studi Karakteristik Pengelasan Smaw Pada Baja Karbon Rendah St 42 Dengan Elektroda E 7018. 1st Ed. Jakarta : Jurnal Konversi Energi Dan Manufaktur UNJ. Oktober 2013.
Sunaryo, Hery. Teknik Pengelasan Kapal. 2nd Ed, Jakarta: Direktorat Pembinaan Sekolah Kejuruan. 2008.
A. V. Adedayo, S. A. Ibitoye And O. A. Oyetoyan, Annealing Heat Treatment Effects On Steel Welds, Journal Of Minerals And Materials Characterization And Engineering, Vol. 9, No. 9, 2010, Pp. 547-557.
A. V. Adedayo, S. A. Ibitoye And O. O. Oluwole, Tempering Heat Treatment Effects On Steel Welds, Journal Of Minerals And Materials Characterization And Engineering, Vol. 10, No. 8, 2011, Pp. 755-764.
R. S. Funderburk, Key Concepts In Welding Engineering, Welding Innovation, Vol. 15, No. 2, 1998
Talabi, S.I.A, Owolabi, O.B.Effect Of Welding Variables On Mechanical Properties Of Low Carbon Steel Welded Joint. Journal Of Advances In Production Engineering & Management. Vol.9. No.4. 2013. Pp.181-186. Http://Dx.Doi.Org/10.14743/Apem2014.4.186.
Karadeniz, E., Ozsarac, U., Yildiz, C. The Effect Of Process Parameters On Penetration In Gas Metal Arc Welding Processes, Materials & Design, Vol. 28, No. 2, 649-656, 2007. Doi: 10.1016/J.Matdes.2005.07.014.
T. V. Raja, C. P. Sharma And A. Sharman, Heat Treatment Principles And Techniques, Prentice Hall Of India Private Limited, New Delhi, 1999, P. 243.
Kim IS Et Al. An Investigation Into An Intelligent System For Predicting Bead Geometry In GMA Welding Process. J Mater Process Technol. 2005.
Jasman, J., Irzal, I., Adri, J., & Pebrian, P.. Effect of Strong Welding Flow on The Violence of Low Carbon Steel Results of SMAW Welding With Electrodes 7018. Teknomekanik, Vol 1(1), 24-31. Agustus. 2018.
Bondan T. Sofyan, Pengantar Material Teknik. 1st Ed. Jakarta: Salemba Teknika.2010.
